Belt conveyor system
| Belt Width | Up to 2.4m |
| Belt Length | 3,000m + |
| Capacity | > 8,000 m?/h |
| Belt speed | Up to 6.0m/s |
| Max Incline | Maximum 25? |
| Drive Type | Motorized pulley | Geared motor unit | Motor+fluid coupling+gear box |
| Belt Options | Antistatic| Fire resistant | Oil resistant | Hard wearing | corrosion resistant |
| Tension Unit | Below 100m – screw type tail tension unit | Above 100m - gravity tension unit or car type tension unit |
| Protection Switches | Speed switch | Belt Sway Switches | Pull-cord switch | Blockage sensor |
| Construction Materials | Conveyor case and internals - stainless or coated mild steel | Conveyor support structure - galvanised mild steel |
| Conveyed Materials | Wet or dry bulky materials in the form of crumbs, grains, pellets, shreds, dust, powder, flake, or crushed products of bio-matter, sludge and aggregate. |
APPLIED INDUSTRIES AND FIELDS
 |
 |
 |
| Coal conveying system of power plant | Port storage yard transfer conveying system | Raw material conveying system of steel mill |
 |
 |
 |
| Open-pit mine conveying system | Bulk conveying system for cement plant | Sand-gravel aggregate conveying system |
SUCCESS PROJECT IN VARIOUS INDUSTRIES
 |
.jpg) |
| Project name: 200,000-ton ore berth project of Dandong Port Material name: Iron ore Handling capacity: 5,000t/h Belt width: 1,800mm Belt length: 4,960m Belt speed: 4.0m/s Installation angle:5° |
Project name: Long distance belt conveyor is used for lignite transportation in opencast coal mine Material name: Lignite Handling capacity: 2,200t/h Belt width: 1,600mm Belt length: 1,562m Belt speed: 2.5m/s Installation angle: -6°~+4° |
 |
 |
| Project name: Heat-resistant belt conveyors are used to transport clinker in cement plants Material name: Cement clinker Handling capacity: 800t/h Belt width: 1,000mm Belt length: 320m Belt speed: 1.6m/s Installation angle: 14° |
Project name: Overland belt conveyor is used to transport coal for coal-fired power plant Material name: Fuel coal Handling capacity: 1,200t/h Belt width: 1,400mm Belt length: 3,620m Belt speed: 2.0m/s Installation angle: 0° |
SELECTION INSTRUCTIONS
1.Material to be conveyed:______
2.Handling capacity: ______ t/h
3.Bulk Density:______ t/m3
4.Center distance between the head and tail pulley:______ m
5.Max. granule size of the feeding material:______ mm
6.Max. Granule's percentage in whole material:______ %
7.What equipment is used to feed the material into the belt conveyor :______
8.What equipment is used to discharge the material from the belt conveyor :______
9.Working power supply: ______ V ______ HZ
10.Does the belt conveyor work alone or with other equipment to form a system? If forming a system, do you have preliminary design or hand-drawn sketch? If have,please send it to our engineer for reference.
© Copyright - 2018-2021 : All Rights Reserved.